|
A. VESSEL
|
|
|
|
1. Capacity:
1040 Cu.
Ft. Cementer Pneumatic - 3 Hoppers |
|
|
|
2. Tank
Construction:
Smooth
exterior, internal rings. 5454-H32 aluminum
vessel. Hydro tested at 37.5 PSI. 45 degree
hopper slope with weld-on spun cones. |
|
|
|
3. End
Frame:Huck
riveted bi-metal end frames with galvanized hi-tensile
steel frame rails and aluminum crossmembers, with
aluminum struts. |
|
|
|
4.
Interior Welds:
Class 1,
as welded. |
|
|
|
5.
Manholes:
(2) 20
Cast aluminum covers, pressure type with 6 cam actuated
adjustable hold downs. Manholes located center and
rear. Full length toe rail. Aluminum cam handles and
nylon wear plates, replaceable wear plates under hold
downs, two stainless cover retainers per manhole. White
neoprene gaskets in manhole covers. Manholes hinge on
curbside. |
|
|
|
6. Shell
Finish:
Mill
finish bulk trailer sheet. |
|
|
|
7.
Baffles:
None |
|
|
|
8.
Documentation:
Unit
tested with water. Professional cleaning is recommended
prior to initial loading to avoid contamination of
cargo. 180 degrees F maximum operating temperature. |
|
|
|
9.
Product Information:
Cement |
|
|
|
10.
Misc. Vessel:
None |
|
B. TANK FITTINGS AND PIPING |
|
|
|
1. Air
Inlet Line:
3 Sch.
10 aluminum line with welded 3 adapter streetside front
of tank. One (1) check valve near P.T.O. inlet. One (1)
check valve upstream of front hopper discharge. |
|
|
|
2.
Aeration:
Three
(3) SureSeal, SureFlo aerators per hopper. 3
aluminum air manifold on curbside, 2 in. hoses supplying
air to aeration system. Hopper saver wear plates. |
|
|
|
3.
Prop/Pres Ctl Valve:
3 Heil
fig. 500, aluminum body butterfly valve (alum/bronze
disc, black Nitrile seat). Located streetside to
regulate airflow to product discharge line. |
|
|
|
4.
Aeration Valve:
3 Heil
fig. 500, aluminum body butterfly valve (alum bronze
disc, black Nitrile seat). Located streetside to
regulate airflow to air manifold line. |
|
|
|
5.
Blow-Down Line:
3 Sch.
10 aluminum with 3 Heil fig. 500 aluminum body
butterfly valve (alum/bronze disc, black Nitrile seat).
Located streetside at front of tank, with outlet
terminating curbside. 25 PSI pressure relief valve. |
|
|
|
6. Top
Air Line:
None. |
|
|
|
7.
Product Valve:
5 in.
alum. Body, iron disc black Nitrile seat, w/stamped
powder coated handle. |
|
|
|
8.
Product Tee:
Cast
aluminum, non-gravity tees, 5 valve x 4 product line. |
|
|
|
9.
Product Line:
4 Sch.
40 aluminum line between hoppers. Rubber hose with
stainless steel screw band clamp connectors between
hoppers. |
|
|
|
10. Rear
Discharge:
Sch. 40
aluminum, bent tube, over the axle. Welded aluminum male
adapter (Part A) and dust cap at rear of discharge
pipe. |
|
|
|
11.
Vacuum Inlet Line:
None. |
|
|
|
12. Load
Line:
None. |
|
|
|
13.
Cyclone Filter:
None. |
|
|
|
14.
Gauges:
Two (2)
4 liquid-filled, one tank pressure, one line pressure.
Gauge pressure range 0-30 PSI. Located streetside
between number one and two hoppers. |
|
|
|
15.
Miscellaneous
None. |
|
|
|
C. ACCESSORIES. |
|
|
|
1.
Ladder:
Rear
center of head, aluminum, with serrated rungs & grab
handles at top step. |
|
|
|
2. Hose
Tubes:
(1) 8 x
21 long aluminum hose tube located curbside rear of
tank. Cast aluminum door at rear. |
|
|
|
3.
Walkway:
Adhesive
backed skid-resistant tape between toe rails. |
|
|
|
4. Tire
Carrier:
None. |
|
|
|
5.
Cabinet:
None. |
|
|
|
6. Hose
Holder:
P.T.O.
hose holder at nose. |
|
|
|
7.
Fenders:
(2)
Aluminum single contour front fenders. (2) Aluminum
double contour rear fenders. |
|
|
|
8.
Splash Guard:
Anti-sail and anti spray for front. Anti-sail and anti
spray for rear. |
|
|
|
9.
Lights:
12-volt
Truck Lite flage mount LED lamp system complying to
FMVSS with conspicuity markings each side and rear. (2)
Combination mid-tank clearance and turn signals, one
each side. (1) Oval third stop light, located rear
center of trailer. |
|
|
|
10.
Wiring:
12-volt
system, 7-wire, molded harness throughout.
Plug-together modular style harness. 7-way SAE J560
connector. |
|
|
|
11.
Miscellaneous:
None. |
|
|
|
D. CHASSIS |
|
|
|
1. Upper
Fifth Wheel:
Hi-tensile steel, bolted and adjustable with 2 forged
kingpin. |
|
|
|
2. Skid
Plate:
None. |
|
|
|
3.
Landing Legs:
OEM 2
speed landing legs, 50,000 lb. rating with sandshoes. |
|
|
|
4.
Suspension:
Hendrickson Intraax Narrow Hanger AANT
230 Air Ride Suspension, parallel (straight) axle, &
brake system, 71.5" track, 5" round, 23,000 lb. axle
beam rating, 49" spacing, with single leveling valve.
Soft-Coat protective coating (black) to provide better
resistance to road wear and corrosion. Heil R2R
("Ready-to-Run") Value Package - Includes Hendrickson's
Five-Year wheel end warranty and factory supplied
chambers, slacks, preset hubs, and drums. |
|
|
|
5. Brake
System:
One (1) aluminum 2850 cu.
in. air tank with rubber saddles and stainless steel
u-bolt mount. System to meet FMVSS requirements.
ABS brake system, 4 wheel sensors-2 modulator valves.
Constant power is standard on auxiliary (blue) center
pin of SAE J560 7-way. 16.5" x 7" (quick change)
S-cam type brake shoes - Heil's R2R Package includes
extended service brake shoes (Premium ABEX 30/30-197
with 5/8" thick brake shoes). "Quick Release"
gladhand on service line. |
|
|
|
6. Brake
Chamber:
OEM type
30-30 parking-emergency spring brake Heils R2R
Package includes Haldex Life Seal
(long stroke) Brake Chambers |
|
|
|
7. Brake
Lining:
OEM
brake lining. |
|
|
|
8. Slack
Adjuster:
OEM (automatic) slack adjuster - Heil's
R2R Package includes Haldex 5.5" automatic slack
adjusters with grease fittings. |
|
|
|
9.
Axles:
(2)
Integral with air ride. |
|
|
|
10. Oil
Seals:
Preset
bearing with Premium seals and visible hub caps for
Heil's R2R Package. |
|
|
|
11.
Paint:
Dupont
Imron 5000 Series gray paint on steel parts only. |
|
|
|
12.
Misc. Chassis:
None. |
|
|
|
|
|
E. HUBS AND DRUMS |
|
|
|
1. Hubs:
(4) 10 Stud, "Hub Pilot" (single
nut mount), aluminum hub for outboard drum (parallel
spindle) (ConMet Preset dual aluminum wheel - stud
length 33mm, two piece flanged wheel nuts). Hub
lubrication - synthetic CD-50 transmission fluid wheel
end lubricant (Premium visible hub caps). |
|
|
|
2.
Drums:
(4)
Centrifuse outboard mount brake drums (16.5 x 7). |
|
|
|
|
|
F. WHEELS |
|
|
|
1.
Wheels:
(8) 10
Stud aluminum machine finish 24.5 x 8.25 (Hub Pilot
single nut mount) wheels. |
|
|
|
|
|
G. TIRES |
|
|
|
1.
Tires:
(8)
Michelin XT-1, 11R24.5 14 Ply G |
|
|
|
|
|
H. MISCELLANEOUS |
|
|
|
1.
Customer Supplied Parts:
None |
|
|
|
2.
Warranty:
Standard
Four Year Warranty. One year bumper to bumper
coverage with some areas (e.g., barrel and frame) being
extended on a pro-rated basis out as much as 4 years.
Includes Heil's R2R ("Ready-to-Roll") Value Package -
Hendrickson's Five-Year wheel end warranty and factory
supplied chambers, slacks, preset hubs, and drums. |
|
|
|
3. Other
Notes:
None. |
